100% Guaranteed Results NS0-528 Unlimited 215 Questions [2024]
NS0-528 Dumps PDF - Want To Pass NS0-528 Fast
NEW QUESTION # 99
You have created a mirror-vault cascade relationship; however, the SnapMirror Snapshot copy does not exist on the vault destination. You must confirm that a SnapMirror label is configured for a mirror-vault cascade to transfer the SnapMirror Snapshot copy to the vault destination.
Which SnapMirror label must be confirmed in this scenario?
- A. weekly
- B. snapmirror
- C. sm-created
- D. daily
Answer: C
NEW QUESTION # 100
Application data needs to be replicated between two FAS9000 clusters running ONTAP 9.7 for DR purposes only. The application has 50 data volumes to be replicated concurrently. You also require that the application can run from the DR site should the production site suffer a disaster.
Referring to the exhibit, what would you use to satisfy the requirements?
- A. Load sharing can be used to concurrently replicate the data between both systems.
- B. SnapMirror can be used to replicate all the data volumes concurrently.
- C. SnapMirror Synchronous can be used to replicate the all the application volumes.
- D. SnapVault backups can be used to replicate all the application volumes.
Answer: D
NEW QUESTION # 101
You are asked to implement a DR solution to protect employee home directories on the primary cluster. The solution should provide an PRO of one hour, disaster recovery and archiving configured on the same destination volume of the DR cluster. Your solution should also reduce the amount of secondary storage requirements and use lower network traffic on the WAN links.
In this scenario, which NetApp replication technology satisfies these requirements?
- A. SyncMirror
- B. SnapMirror
- C. MetroCluster
- D. SnapMirror-Sync
Answer: B
NEW QUESTION # 102
You are asked to size an ONTAP disaster recovery and backup cluster. You are required to use 4 x 40 Gb Ethernet ports per controller and 4 x 32 Gb FC ports per controller. You also need to confirm support for Commvault IntelliSnap for NetApp v11.
In this scenario, which two tools would confirm these requirements? (Choose two.)
- A. OneCollect
- B. Hardware Universe
- C. Active IQ
- D. Interoperability Matrix Tool
Answer: B,D
NEW QUESTION # 103
You are asked to provision some new storage for VMware.
Which two tools are available to perform this task? (Choose two.)
- A. ONTAP System Manager
- B. Virtual Storage Console
- C. SnapCenter Plug-in for VMware vSphere
- D. OnCommand Insight
Answer: A,B
NEW QUESTION # 104
What is the difference between synchronous and asynchronous SnapMirror replication?
- A. Synchronous replication is faster than asynchronous replication
- B. Synchronous replication ensures that data is consistent between systems, while asynchronous replication does not
- C. Asynchronous replication requires less network bandwidth than synchronous replication
- D. Asynchronous replication ensures that data is consistent between systems, while synchronous replication does not
Answer: B
NEW QUESTION # 105
What is a recovery point objective (RPO) in NetApp data protection software?
- A. The minimum amount of storage space required for backups
- B. The minimum amount of bandwidth required for backups
- C. The maximum amount of time it takes to recover data after a disaster
- D. The maximum amount of data that can be lost during a disaster
Answer: D
NEW QUESTION # 106
What is the difference between a cold data tier and a hot data tier in a hybrid cloud data protection solution?
- A. A hot data tier is encrypted for protection, while a cold data tier is not
- B. A cold data tier is faster than a hot data tier
- C. A hot data tier is optimized for data access, while a cold data tier is optimized for cost savings
- D. A cold data tier is replicated more frequently than a hot data tier
Answer: C
NEW QUESTION # 107
You are using Veeam Backup & Replication to create Snapshot-based backups of your VMware environment running ONTAP. You added your primary and secondary ONTAP cluster to the Veeam Storage inventory. However, you are unable to select your secondary ONTAP cluster as a secondary target for your Veeam backup job.
In ONTAP System Manager, which action solves this problem?
- A. Initialize SnapVault for the volume that you want to back up.
- B. Change the security style to NTFS for the volume you want to back up.
- C. Select "Make Snapshot directory visible" for each volume that you want to back up.
- D. Create a vsadmin account to grant cluster access to Veeam for each volume that you want to back up.
Answer: A
NEW QUESTION # 108
What are two NetApp data protection solutions? (Choose two.)
- A. SnapVault
- B. TimeFinder
- C. SnapMirror
- D. RecoverPoint
Answer: A,C
NEW QUESTION # 109
Your disaster recovery strategy requires a mirror, an archive, and a tape backup.
Which software would you recommend for this scenario?
- A. OnCommand Workflow Automation
- B. OnCommand Unified Manager
- C. OnCommand System Manager
- D. SnapProtect
Answer: D
NEW QUESTION # 110
What is MetroCluster in NetApp ONTAP?
- A. A cloud storage solution that provides backup and recovery services
- B. A method for compressing data to reduce storage space
- C. A method for encrypting data to protect it from unauthorized access
- D. A high-availability solution that provides synchronous data replication between two clusters
Answer: D
NEW QUESTION # 111
Click the Exhibit button.
You have a SnapProtect v11 environment as shown in the exhibit.
What are the two default Snapshot copies created automatically after creating a Storage Policy. (Choose two.)
- A. Primary (Classic)
- B. Primary (Tape)
- C. primary (Snap)
- D. Primary (NetApp)
Answer: A,C
NEW QUESTION # 112
You must determine if there have been any backup problems overnight.
Which two reports in OnCommand Unified Manager 6.2 would provide you with the required information? (Choose two.)
- A. On Command Cluster Events Details
- B. On Command Job Events Details
- C. Unresolved Incidents and Risks area
- D. On Command Unified Manager Dashboard
Answer: B,D
NEW QUESTION # 113
What is the purpose of deduplication in NetApp ONTAP?
- A. To encrypt data for protection
- B. To reduce the amount of storage space required
- C. To create backup copies of data
- D. To optimize data access speed
Answer: B
NEW QUESTION # 114
Click the Exhibit button.
You have been receiving the lag status error notifications shown in the exhibit.
What must you do to correct this problem?
- A. Quiesce the relationship.
- B. Fan out the relationship.
- C. Resynchronize the relationship.
- D. Add a schedule to the relationship.
Answer: C
NEW QUESTION # 115
What are the benefits of using encryption in a data protection solution?
- A. It simplifies data backup and recovery
- B. It prevents unauthorized access to data
- C. It reduces data storage costs
- D. It ensures high availability of data
Answer: B
NEW QUESTION # 116
A client is planning to configure a SnapMirror relationship between two sites. Normally their ISP provides network throughput of 100 Mbps; however, they can arrange to have this burst to 1 Gbps for a period of time at an additional cost.
Their intention is to back up 400 GB of Snapshot data each day using the burst option to keep the replication time to a minimum.
In this scenario, how much burst time do they need to purchase?
- A. 15 minutes
- B. 60 minutes
- C. 30 minutes
- D. 45 minutes
Answer: D
NEW QUESTION # 117
You have a FAS9000 with 10 TBNL-SAS drives that is replicating to a FAS8200 with 4 TB NL-SAS drives. An 80 TB source volume on the FAS9000 is showing 50% storage efficiency. After that volume mirror is initialized, the FAS8200 destination volume is showing only 10% storage efficiency.
In this scenario, why is storage efficiency reduced after replication?
- A. The source volume has inline deduplication enabled.
- B. The different sized drives use different efficiency methods.
- C. The destination volume has post process compression enabled.
- D. The different controller models require logical replication.
Answer: B
NEW QUESTION # 118
A company just installed SnapCenter to help manage their ONTAP 9.7 environment. The database administrator wants to add new volumes with LUNs for a 10 TB Oracle database.
Which two tools would accomplish this task? (Choose two.)
- A. ONTAP System Manager
- B. SnapCenter Plug-in for Oracle Database
- C. Active IQ Unified Manager
- D. OnCommand Insight
Answer: A,B
NEW QUESTION # 119
Which technology uses synchronous replication?
- A. FabricPool
- B. MetroCluster mirrored aggregate
- C. SVM DR
- D. SnapMirror XDP
Answer: D
NEW QUESTION # 120
Your customer wants to implement a solution to protect only a select number of NFSv3 volumes in a particular aggregate that stores their mission-critical application data. The customer wants the volume's data replicated to secondary storage and have application write operations fail if they cannot be replicated.
The customer needs to maintain a zero RPO and a very low RTO. In this scenario, which solution satisfies these requirements?
- A. SnapMirror Synchronous using Sync mode
- B. Mirrored aggregates using SyncMirror
- C. SnapMirror Synchronous using StrictSync mode
- D. Mirrored SVMs using MetroCluster
Answer: B
NEW QUESTION # 121
Your manager requires you to protect a production SVM called svm01 by using SVM-DR. Your manager insiststhat all configuration and data LUNs be replicated to the DR cluster. The destination SVM should be called drsvm01. You set up an SVM-DR relationship between the clusters, specifying that the - identity- preserve option is set to true.
After the initial replication completes, you discover that the iSCSI LIF configuration has not been replicated to drsvm01.
What should you do to solve this problem?
- A. Run the relationship a second time and check the configuration again.
- B. Add the FC protocol to the destination and configure the FC LIFs.
- C. Manually create andconfigure the iSCSI LIFs on drsvm01.
- D. Set up a new relationship without using the -identity-preserve option.
Answer: A
NEW QUESTION # 122
......
Updated Verified NS0-528 Q&As - Pass Guarantee: https://certkingdom.practicedump.com/NS0-528-practice-dumps.html