Excellent 500-470 Updated 2024 Dumps With 100% Exam Passing Guarantee
Best way to practice test for Cisco 500-470
Cisco 500-470 certification is highly valued in the IT industry, as it demonstrates that the holder has the skills and knowledge needed to design and manage complex network solutions. Cisco Enterprise Networks SDA, SDWAN and ISE Exam for System Engineers certification is particularly important for system engineers, as it validates their ability to work with Cisco's Enterprise Networks SDA, SDWAN, and ISE technologies.
Cisco 500-470 exam covers a range of topics, including software-defined networking (SDN), network virtualization, network access control, and security. Candidates will be tested on their ability to design, implement, and troubleshoot complex network solutions using Cisco technologies such as Cisco Identity Services Engine (ISE), SD-Access, and SD-WAN. 500-470 exam also includes questions about network automation and programmability, as well as best practices for network design and implementation.
NEW QUESTION # 15
Which is a key function of a Digital Network?
- A. Software upgrades
- B. Centralized provisioning
- C. Nat traversal
- D. Provides secure data plane with remote vEdge routers
Answer: B
Explanation:
Explanation
A Digital Network is a network that is based on the Cisco Digital Network Architecture (Cisco DNA), which is an open and extensible, software-driven network architecture designed to rapidly deliver services that enable IT to innovate faster, reduce costs and complexity, lower risk, and comply with regulatory requirements1. A key function of a Digital Network is centralized provisioning, which allows IT to automate the deployment and configuration of network devices and services using a single platform, such as the Cisco DNA Center2.
Centralized provisioning simplifies network management, reduces human errors, and accelerates network changes.
References:
2: [Cisco DNA Software - Digital Network Architecture - Cisco] : 1: [Cisco Digital Network Architecture]
NEW QUESTION # 16
Which two products are supported as "Extended" in DNA-C 1.1? (Choose two.)
- A. AP 3800
- B. Catalyst 3560-CX
- C. Catalyst 6807
- D. M3 Line cards
- E. Catalyst 4500-E
- F. IE switches
Answer: B,F
Explanation:
Explanation
https://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise-networks/software-defined-access/guide-c07-7
NEW QUESTION # 17
Which is a key function of a Digital Network?
- A. Provides secure data plane with remote vEdge routers
- B. Software upgrades
- C. Nat traversal
- D. Centralized provisioning
Answer: A
NEW QUESTION # 18
Which two options are used as part of an ISE POV? (Choose two.)
- A. YouTube
- B. Implementation on Production Network
- C. POV Kit
- D. dCloud
- E. Cisco TV
Answer: C,D
Explanation:
Explanation
An ISE PoV (Proof of Value) is a service that demonstrates the value of Cisco Identity Services Engine (ISE) to potential customers. It consists of two components: a virtual machine (VM) and a license. The VM is a pre-configured ISE environment that can be deployed on any cloud platform, such as Cisco dCloud1. The license is a one-time payment that grants access to the ISE features and capabilities for three years2.
The two options that are used as part of an ISE PoV are A and E. Option A refers to the VM, which is the core component of the ISE PoV. Option E refers to the POV Kit, which is a bundle that includes the VM, the license, and some additional resources, such as documentation, videos, and webinars2. Option B, C, and D are not used as part of an ISE PoV.
References: 1 Cisco dCloud 2 ISE PoV licenses
NEW QUESTION # 19
What two best describe self-healing functionality on vEdges? (Choose two.)
- A. In software upgrade process, rolling back to the previously running software image when connectivity to vManage fails
- B. Software reconfiguration capability allowing for dynamic reconfiguration of existing channels
- C. vManage detect routing outage detection to detect reachability outages and understand their scope and likely root cause
- D. With configuration change, rolling back the configuration change when loss of connectivity to vManage
Answer: A,D
NEW QUESTION # 20
Which are three Cisco ISE use cases? (Choose three.)
- A. Assurance
- B. Segmentation
- C. BYOD
- D. Access Control
- E. Monitoring
- F. Security Incident and Event Management
Answer: A,C,E
Explanation:
Explanation
Cisco ISE is a network access control solution that uses policy-based decision making to determine if a device is allowed access to the network and, if allowed, what level of access this device is given1.Cisco ISE can also provide authentication, authorization, and accounting (AAA) through the RADIUS protocol and device administration through TACACS+ service1.
Some of the use cases of Cisco ISE are:
Access Control: Cisco ISE can grant and control the right level of network access for both wired and wireless devices by employing mainly the 802.1x protocol and EAPoL (EAP over LAN)1.Cisco ISE can also use MAC authentication bypass (MAB) to authenticate devices that are unable to use the EAP protocol1.Additionally, Cisco ISE can integrate with Microsoft Active Directory for confirming user identity1.
Assurance: Cisco ISE can monitor and troubleshoot the various features on ISE and analyze trends of the network activities from a centralized admin node2.Cisco ISE can also provide reports on user andentity behavior analytics (UEBA), enterprise mobility management/mobile device management (EMM/MDM), security incident and event management (SIEM), and segmentation34.
Monitoring: Cisco ISE can provide endpoint visibility with context by collecting and analyzing data from various sources such as endpoints, users, applications, devices, networks, and cloud services4.Cisco ISE can also provide real-time alerts and notifications on security events and anomalies4.
NEW QUESTION # 21
Which protocol is used between an Endpoint and a Switch with an 802.1 authentication?
- A. TACACS
- B. MAB
- C. EAP
- D. RADIUS
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750/software/release/15-0_2_se
/configuration/guide/scg3750/sw8021x.pdf
The protocol that is used between an endpoint and a switch with an 802.1 authentication is EAP, which stands for Extensible Authentication Protocol. EAP is a framework that defines how the endpoint (also called the supplicant) and the switch (also called the authenticator) exchange authentication messages over a wired or wireless network. EAP supports various authentication methods, such as passwords, certificates, tokens, or biometrics, and can be encapsulated in different transport protocols, such as RADIUS, Diameter, or EAPOL. EAP is used in 802.1X authentication, which is a standard for port-based network access control that prevents unauthorized access to a network1.
The other options, TACACS, MAB, and RADIUS, are not protocols that are used between an endpoint and a switch with an 802.1 authentication. TACACS is a protocol that provides remote authentication and authorization for network devices, such as routers or switches, but it is not used for endpoint authentication.
MAB is a technique that uses the MAC address of an endpoint as a credential for 802.1X authentication, but it is not a protocol itself. RADIUS is a protocol that provides centralized authentication, authorization, and accounting for network access, but it is not used directly between the endpoint and the switch, but rather between the switch and the authentication server1. References := : 2: What Is 802.1X Authentication? How Does 802.1x Work? - Fortinet2, 1: IEEE 802.1X - Wikipedia1
NEW QUESTION # 22
Which three statements are true regarding Cisco SDWAN license tiers? (Choose three.)
- A. With Enterprise license, vAnalytics is included
- B. With Pro license, unlimited segmentations are supported
- C. With Pro license, control and data policies are supported
- D. With Plus license, split-tunnel is supported
- E. With Plus license, Hub and spoke, partial mesh are supported
- F. With Enterprise license, TCP optimization is not supported
Answer: A,C,D
NEW QUESTION # 23
How many bytes does a VxLAN header add to an original Ethernet frame?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Explanation/Reference:
Reference: https://www.cisco.com/c/en/us/support/docs/lan-switching/vlan/212682-virtual-extensible-lan- and-ethernet-virt.html
NEW QUESTION # 24
Which options are Network Access Device types?
- A. Switches, Routers, and VPN Gateways
- B. Wireless Controllers, Routers, and VPN Gateways
- C. Switches, Wireless Controllers, and VPN Gateways
- D. Switches, Wireless Controllers, and Routers
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Campus/CVD-Software-Defined-Access-Design-Gu References := Some possible references are:
Cisco Enterprise Networks SDA, SDWAN and ISE Exam for System Engineers (ENSDENG) Study Guide Cisco Identity Services Engine Administrator Guide, Release 2.7 - Configure Network Access Devices
[Cisco Identity Services Engine]
NEW QUESTION # 25
Which workflow is necessary for setting up a network hierarchy?
- A. Design
- B. Provision
- C. Assurance
- D. Policy
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna-c The workflow that is necessary for setting up a network hierarchy is Design. The Design area is where you create the structure and framework of your network, including the physical topology, network settings, and device type profiles that you can apply to devices throughout your network. You can create a network hierarchy that represents your network's geographical locations, such as sites, buildings, and floors. You can also define global network settings, such as device credentials, IP address pools, service provider profiles, and network servers. You can also create network profiles, which are collections of design settings that you can assign to devices based on their roles and functions1.
References:
1: [Cisco DNA Center User Guide, Release 2.2.3 - Design Network Hierarchy and Settings [Cisco DNA Center] - Cisco]
NEW QUESTION # 26
Which three statements best describe Cisco ISE configuration capabilities? (Choose three.)
- A. ISE requires an understanding of the command line for set-up and configuration.
- B. ISE Deployment Assistant (IDA) is a built in application designed to accelerate the deployment of Cisco Identity Service Engine (ISE)
- C. ISE wizards and per-canned configurations ease ISE roll-out significantly.
- D. Cisco Active Advisor provides additional guidance for ISE deployments.
- E. Cisco ISE includes wireless setup wizard and visibility wizard.
Answer: B,C,E
Explanation:
Explanation
Cisco ISE configuration capabilities include the following features:
ISE Deployment Assistant (IDA) is a built-in application designed to accelerate the deployment of Cisco Identity Service Engine (ISE). IDA guides the user through the initial setup, configuration, and verification of ISE with a step-by-step wizard. IDA also provides best practices and recommendations for common deployment scenarios, such as wireless, wired, VPN, guest, and BYOD1.
Cisco ISE includes wireless setup wizard and visibility wizard. The wireless setup wizard simplifies the configuration of ISE for wireless access by automating the tasks of adding network devices, creating authorization profiles, and applying policies. The visibility wizard helps the user to enable device profiling and posture services, and to view the endpoint information and compliance status on the ISE dashboard2.
ISE wizards and per-canned configurations ease ISE roll-out significantly. ISE wizards are interactive tools that assist the user in configuring various features and functions of ISE, such as certificates, network access devices, authentication and authorization policies, guest access, BYOD, and TrustSec.
Per-canned configurations are predefined templates that provide common settings and values for ISE components, such as policy sets, authorization profiles, and network conditions. The user can apply these templates to quickly configure ISE for specific use cases, such as 802.1X, MAB, or web authentication3.
The other options, Cisco Active Advisor and ISE command line, are not accurate descriptions of ISE configuration capabilities. Cisco Active Advisor is a separate cloud-based service that provides network health and security checks, device lifecycle management, and best practice recommendations for Cisco devices. It is not directly related to ISE deployments. ISE command line is an interface that allows the user to perform administrative tasks, such as backup and restore, password recovery, and troubleshooting. However, ISE does not require an understanding of the command line for set-up and configuration, as most of the functions can be done through the graphical user interface (GUI). References := : 1: ISE Deployment Assistant (IDA) - Cisco Identity Services Engine - Cisco, 2: Cisco Identity Services Engine Administrator Guide, Release 2.7 - Wireless Setup Wizard [Cisco Identity Services Engine] - Cisco, 3: Cisco Identity Services Engine Administrator Guide, Release 2.7 - ISE Wizards [Cisco Identity Services Engine] - Cisco, : Cisco Active Advisor - Cisco, : Cisco Identity Services Engine CLI Reference Guide, Release 2.7 - Using the Command-Line Interface [Cisco Identity Services Engine] - Cisco
NEW QUESTION # 27
Whatis a challenge of having an SD-Access Centralized design where a single fabric encompasses the main site and all branch sites across the WAN?
- A. End to End Routing is not supported
- B. Since the traffic is encapsulated, SD-WAN features can't be used to optimize/route traffic.
- C. DNA Center does not support it.
- D. SSIDs would be the same across all sites
Answer: B
Explanation:
Explanation
A centralized SD-Access design is where a single fabric domain spans across the main site and all branch sites over the WAN. This design has some challenges, such as:
Since the traffic is encapsulated in VXLAN headers, SD-WAN features such as application-aware routing, QoS, and security policies cannot be applied to the traffic based on the original IP headers. This means that the SD-WAN controller cannot optimize or route the traffic based on the application or user identity. The traffic is treated as a single class of service across the WAN.
The centralized design also introduces a single point of failure and a potential bottleneck at the main site, where the border nodes and the control plane nodes are located. If the main site goes down or the WAN link fails, the branch sites will lose connectivity to the fabric domain and the external networks.
The centralized design also requires a high bandwidth and low latency WAN connection between the main site and the branch sites, which may not be feasible or cost-effective for some scenarios.
References :=
Some possible references are:
Cisco Enterprise Networks SDA, SDWAN and ISE Exam for System Engineers (ENSDENG) Study Guide Cisco SD-Access and SD-WAN Integration Design Guide
NEW QUESTION # 28
What is the default interval for BFD packets?
- A. 1 second
- B. 10 seconds
- C. 15 seconds
- D. 5 seconds
Answer: A
NEW QUESTION # 29
How many vEdge router security zones (VPN's) can be configured?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Explanation/Reference:
Reference: https://sdwan-docs.cisco.com/Product_Documentation/Software_Features/ Release_18.1/04Segmentation/02Configuring_Segmentation_(VPNs)
NEW QUESTION # 30
What is the maximum # of concurrent endpoint with a distributed deployment?
- A. 100,000
- B. 10,000
- C. 20,000
- D. 500,000
Answer: D
Explanation:
Explanation
The maximum number of concurrent endpoints with a distributed deployment depends on the type of deployment and the hardware used. According to the Cisco documentation1, there are two types of distributed deployments: hybrid and dedicated.
A hybrid deployment is where the Policy Administration Node (PAN) and the Monitoring Node (MnT) personas are co-located on the same node, and the Policy Service Node (PSN) persona is distributed across multiple nodes. A hybrid deployment can support up to 20,000 concurrent endpoints with a maximum of 5 PSNs on SNS-36xx or SNS-35xx hardware.
A dedicated deployment is where the PAN, MnT, and PSN personas are separated on different nodes. A dedicated deployment can support up to 500,000 concurrent endpoints with a maximum of 50 PSNs on SNS-36xx or SNS-35xx hardware.
The main difference between the hybrid and dedicated deployments is the scalability and redundancy of the MnT persona, which collects and stores the logs and sessions from the PSNs. By breaking the PAN and MnT roles out on to their own servers, the dedicated deployment can handle more concurrent endpoints and PSNs, as well as provide failover and load balancing for the MnT persona2 References := Performance and Scalability Guide for Cisco Identity Services Engine Solved: ISE concurrent connections query - Cisco Community
NEW QUESTION # 31
Which three wireless product families are supported in the current DNA-C 1.1 release? (Choose three.)
- A. WLC 5508
- B. AP 3800
- C. WLC 3504
- D. AP 1260
- E. WLC 8540
Answer: B,C,E
NEW QUESTION # 32
What is the role of DNA Center in SD-Access?
- A. provide GUI management abstraction & Analytics via Multiple Service Apps
- B. Maintain a database of Endpoint IDs to Fabric Edge Nodes
- C. Identifying and Authenticating Endpoints
- D. The point of exchange of reachability and policy for two domains
Answer: A
NEW QUESTION # 33
Which are three Cisco recommendations on "How to Win"? (Choose three.)
- A. Talk about Cisco's focus on Security and integration with StealthWatch, Sourcefire, WSA, vulnerability scanner to make smarter policy decisions.
- B. Explain support for 3 party network devices.
rd - C. Demonstrate complex policy flows, rather show case Wizards and enhanced context visibility.
- D. Show case Cisco portfolio or ISE feature set during PoC
- E. Explain architectural advantage of holistic Cisco solution.
Answer: A,D,E
NEW QUESTION # 34
Which two are benefits from a WAN design? (Choose two.)
- A. Prioritize and secure with granular control
- B. Ensure remote site uptime
- C. Lower circuit bandwidth requirements
- D. Provide lower quality service to guest users
- E. Reduce cost and increase operational complexity
Answer: A,B
NEW QUESTION # 35
Which three options describe fabric overlay concepts? (Choose three.)
- A. A link state routing protocol like OSPF
- B. An Overlay is a logical topology
- C. Intermediate System to Intermediate System
- D. An Overlay uses alternate forwarding attributes
- E. A virtual Local Area Network
- F. GRE is a type of Overlay
Answer: B,D,F
Explanation:
Explanation
Fabric overlay concepts are related to the creation of a virtual network topology on top of a physical network infrastructure. The overlay network is usually designed to provide services or features that are not directly supported by the underlay network, such as network segmentation, mobility, or security. Some of the fabric overlay concepts are:
An overlay is a logical topology: An overlay network is a network that is built on top of another network using software or hardware devices that encapsulate and decapsulate packets. The overlay network creates a logical topology that is independent of the physical topology of the underlay network. The overlay network can span multiple Layer 2 or Layer 3 domains and provide end-to-end connectivity for the overlay endpoints. An example of an overlay network is a VPN that connects remote sites over the Internet.
GRE is a type of overlay: Generic Routing Encapsulation (GRE) is a protocol that encapsulates packets of one protocol type within another protocol type. GRE is used to create tunnels between devices that can carry different types of traffic, such as IP, IPv6, MPLS, or Ethernet. GRE is a type of overlay network that can be used to extend Layer 2 or Layer 3 connectivity across different networks or to provide a secure and private communication channel. An example of a GRE overlay network is a DMVPN that uses GRE tunnels to connect branch offices to a central hub over the Internet.
An overlay uses alternate forwarding attributes: An overlay network uses different attributes or identifiers to forward packets than the underlay network. The overlay network adds specific headers or tags to the packets that contain information about the overlay endpoints, such as their logical addresses, group memberships, or policies. The overlay devices use these attributes to forward packets based on the overlay topology and services, rather than the underlay topology and protocols. The underlay devices are unaware of the overlay attributes and forward packets based on the underlay headers. An example of an overlay network that uses alternate forwarding attributes is a VXLAN network that uses VNIs to segment traffic and provide Layer 2 connectivity over a Layer 3 network.
The other options, Intermediate System to Intermediate System (IS-IS), a virtual Local Area Network (VLAN), and a link state routing protocol like OSPF, are not fabric overlay concepts. IS-IS and OSPF are routing protocols that are used to exchange routing information and build the routing table of the underlay network. A VLAN is a Layer 2 segmentation technique that divides a physical network into logical subnets based on the switch port membership. A VLAN is not an overlay network, but it can be part of the underlay network or the overlay network, depending on the design. References := : Fabric Technologies and Overlays - Cisco Learning Network1, What Is a Network Fabric? - Cisco2
NEW QUESTION # 36
What definition is not part of 4D Training?
- A. Demo
- B. Design
- C. Discover
- D. Deploy
- E. Defend
Answer: D
Explanation:
Explanation
The 4D Training is a methodology that helps Systems Engineers and Field Engineers to understand and sell Cisco Enterprise Networks solutions, such as SD-Access, SD-WAN, and ISE. The 4D stands for Discovery, Design, Demonstrate, and Defend12. These are the four phases of the sales cycle that the training covers, with each phase having specific objectives, activities, and outcomes.
Discovery: This phase involves identifying the customer's needs, challenges, goals, and opportunities, as well as the current state of their network. The objective is to establish a trusted relationship with the customer and uncover their pain points and requirements. The activities include conducting interviews, surveys, assessments, and audits. The outcome is a clear understanding of the customer's business and technical drivers, as well as their readiness and willingness to adopt Cisco solutions.
Design: This phase involves creating a high-level solution architecture that meets the customer's needs and aligns with their vision. The objective is to demonstrate the value proposition and benefits of Cisco solutions, as well as the differentiation from the competition. The activities include developing use cases, scenarios, diagrams, and presentations. The outcome is a compelling and customized solution design that addresses the customer's challenges and opportunities.
Demonstrate: This phase involves showing the capabilities and features of Cisco solutions in action, using live or simulated environments. The objective is to validate the solution design and showcase the advantages and benefits of Cisco solutions, as well as the ease of deployment and operation. The activities include conducting demos, proofs of concept, pilots, and trials. The outcome is a positive customer experience and feedback, as well as a confirmation of the solution fit and feasibility.
Defend: This phase involves addressing the customer's objections, concerns, and questions, as well as overcoming any barriers or risks that may prevent the deal closure. The objective is to reinforce the value proposition and benefits of Cisco solutions, as well as the trust and credibility of Cisco as a partner. The activities include providing references, testimonials, case studies, and best practices. The outcome is a successful deal closure and customer satisfaction.
Therefore, the definition that is not part of the 4D Training is Deploy, which is not one of the four phases of the sales cycle that the training covers.
References:
1: [500-470 ENSDENG - Cisco] : 2: [500-490 ENDESIGN - Cisco]
NEW QUESTION # 37
Which two are benefits from a WAN design? (Choose two.)
- A. Prioritize and secure with granular control
- B. Ensure remote site uptime
- C. Lower circuit bandwidth requirements
- D. Provide lower quality service to guest users
- E. Reduce cost and increase operational complexity
Answer: A,B
Explanation:
Explanation
A WAN design is a plan for how to connect multiple sites or locations over a wide area network (WAN). A WAN design can have various benefits, depending on the goals and requirements of the organization. Two of the possible benefits from a WAN design are:
Ensure remote site uptime: A WAN design can help to ensure that remote sites or branches have reliable and consistent connectivity to the central site or the cloud. This can improve the availability and performance of critical applications and services, such as voice, video, collaboration, and data backup. A WAN design can also provide redundancy and resiliency in case of network failures or disasters, by using multiple WAN links, backup routes, or failover mechanisms. For example, SD-WAN is a WAN design that uses software to dynamically route traffic over the best available WAN link, based on the network conditions and the application requirements1.
Prioritize and secure with granular control: A WAN design can also help to prioritize and secure the traffic and applications that flow over the WAN. This can enhance the quality of service (QoS) and the security of the network. A WAN design can use various techniques, such as traffic shaping, policy-based routing, encryption, firewall, or VPN, to classify, prioritize, and secure the WAN traffic according to the business needs and the security policies. For example, TrustSec is a WAN design that uses software-defined segmentation to enforce granular access policies based on the identity and context of users, devices, and applications2.
The other options, provide lower quality service to guest users, reduce cost and increase operational complexity, and lower circuit bandwidth requirements, are not benefits from a WAN design. Providing lower quality service to guest users is not a desirable outcome, as it can affect the user experience and the reputation of the organization. Reducing cost and increasing operational complexity is a trade-off that may not be worth it, as it can create more challenges and risks for the network management and maintenance. Lowering circuit bandwidth requirements is not a benefit in itself, but a means to achieve other benefits, such as reducing cost or improving performance. A WAN design should aim to optimize the bandwidth utilization and allocation, rather than simply lowering it. References := : 1: Cisco SD-WAN Solution Design Guide (CVD) - Cisco1, 2:
Cisco TrustSec Solution Overview - Cisco
NEW QUESTION # 38
Which two factors are used in calculating the Cisco SD WAN - 1yr, 3yr, or 5yr subscription cost? (Choose two.)
- A. Routing Protocol
- B. Security
- C. Features
- D. Service Bandwidth
- E. Hypervisor Platform
Answer: C,D
NEW QUESTION # 39
How does identity management solve two customer problems? (Choose two.)
- A. Provides network visibility and security
- B. Achieves dynamic and adaptive network segmentation
- C. Manages group membership
- D. Enables and enforces 802.1X across the network platform
- E. Increases digitization
Answer: A,B
NEW QUESTION # 40
......
Cisco Enterprise Networks SDA, SDWAN and ISE Exam for System Engineers Certification Sample Questions and Practice Exam: https://certkingdom.practicedump.com/500-470-practice-dumps.html