100% Passing Guarantee - Brilliant 301 Exam Questions PDF [Dec-2021]
301 Dumps 2021 - NewF5 301 Exam Questions
NEW QUESTION 13
What occurs when a load?command is issued?What occurs when a ? load?command is issued?
- A. the running configuration is replaced by the configuration in the files, but only if they are syntactically correct.
- B. The running configuration is loaded into files for storage.
- C. The running configuration is compared to the configuration in files and, when changes are noted, the version in the files is loaded over what is in money.
- D. The running configuration is replaced by the any portion of the configuration files that are syntactically correct.
Answer: A
NEW QUESTION 14
An LTM has the 3 virtual servers, 2 SNATs, four self IP addresses defined and the networks shown in the graphic below. Selected options for each object are shown below. Settings not shown are at their defaults.
Assume port exhaustion has not been reached. VirtualServerl Destination: 10.10.2.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network SNAT Automap configured VirtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNATI Source IP: 10.10.0.0 netmask 255.255.0.0 SNATAddress: SNAT Pool with 2 members- 172.16.20.50 and 192.168.10.50 SNAT2 Source IP: All Addresses SNAT Address: 10.10.2.102 Floating Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1 A connection attempt is made with a source IP and port of 10.20.10.50:2222 and a destination IP and port of 10.10.2.102:80. When the request is processed, what will be the source and destination IP addresses?
- A. Source IP: 10.20.10.50; Destination IP: pool member in the 192.168/16 network
- B. Source IP: 172316.20.50; Destination IP: pool member in the 182.16/16 network
- C. Source IP: 192.168.10.50; Destination IP: pool member in the 192.168/16 network
- D. Source IP: 182.16.1.1; Destination IP: pool member in the 172316/16 network
- E. Source IP: 192.168.1.1; Destination IP: pool member in the 192.168/16 network
- F. The request will be dropped.
- G. Source IP: 10.20.10.50; Destination IP: pool member in the 172.16/16 network
- H. Source IP: 192.168.10.50; Destination IP: pool member in the 192.168./16 network
Answer: D
NEW QUESTION 15
A monitor has been defined with an alias port of 443. All other options are left at their defaults. The administrator
wishes to assign it to a pool of members where the members' ports vary. Which is the result?
- A. For each member, the monitor will test member node at port 443. For each member, the monitor will test the member ? node at port 443.
- B. For each member, if the member port is not 443, the member will be marked down. For each member,if the member? Port is not 443, the member will be marked down.
- C. This assignment is not allowed since the port do not match.
- D. For each member. If it is running an SSL service at the member port, the monitor may work. Otherwise, the monitor will fail and the member for each member, if it is running an SSL service at the member port, the monitor may work. Otherwise, the monitor will fail and the member will be marked down.
Answer: A
NEW QUESTION 16
When a pool is created and saved to file, where is the default file and location for the pool configuration? When a pool is created and saved to file, where is the default file and location for the pool configuration?
- A. lconfig/bigip.conf
- B. /etc/bigip_base.conf
- C. /config/bigip_base.conf
- D. /config/BigDB.dat
Answer: A
NEW QUESTION 17
A BIG-IP has the following objects configured: A SNAT pool with 2 members:
150.10.33.33 and 10.10.1.33 A load-balancing pool with 5 members:
10.10.1.1-10.10.1.5:80
The BIG-IP has two self-IP addresses: 150.10.10.10 and 10.10.1.10 A virtual server at 150.10.30.30:80 that is associated with both the SNAT pool and the load-balancing pool. If a client at IP address 200.10.10.10 initiates a connection to the virtual server, what will the source IP address be in the packets sent to the chosen pool member?
- A. 10.10.1.10
- B. 10.10.1.33
- C. 200.10.10.10
- D. 150.10.30.30
- E. 150.10.33.33
- F. It could be any of the addresses of the members of the load-balancing pool.
Answer: B
NEW QUESTION 18
Could an iRule perform persistence based on a cookie?
- A. Yes. An iRule could be desiged to persist based on the contents of a cookie.
- B. No. Cookie persistence is only is based on a cookie persistence profile.
- C. Yes An iRule could be designed to persist based on the contents of a cookie.
- D. No. iRules cannot affect persistence.
Answer: A
NEW QUESTION 19
Which action CANNOT be performed by an iRule?
- A. Direct a client's request to a pool based on the client's browser's language.
- B. Direct a connection request to a specific pool.
- C. Chang the virtual server's default pool.
- D. Limit a given client to a set amount of bandwidth.
- E. Substitute a server's response with alternate data.
- F. Discard a client before connecting to a server.
Answer: C
NEW QUESTION 20
An LTM has the 3 virtual servers, a SNAT, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults. VirtualServerl Destination: 10.10.2.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network VirtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNAT1 Source IP: All Addresses SNATAddress: SNAT Pool with 2 members- 172.16.20.50 and 192.168.10.50 Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1 A connection attempt is made with a source IP and port of 10.20.100.50:2222 and a destination IP and port of 10.10.2.10:80. When the request is processed, what will be the destination IP address?
- A. Destination IP: pool member in the 192.168/16 network.
- B. Destination IP: 10.10.2.10
- C. The request will be dropped.
- D. Destination IP: pool member in the 172.16/16 network
Answer: B
NEW QUESTION 21
What is the expected difference between two source address persistence profiles if profile A has a mask of 255.255.255.0 and profile B has a mask of 255.255.0.0?
- A. Profile B has a greater potential number of persistence records.
- B. Profile B will have fewer persistence records for the sane client base.
- C. There are no detectable differences.
- D. Profile A will have more clients matching existing persistence records.
Answer: B
NEW QUESTION 22
Which three parameters could be used to determine whether a connection request will have the source address translated as the request is processed? (Choose three.)
- A. the client's TCP port
- B. the client's browser's preferred language
- C. the client IP fragment offset
- D. the client's router's IP address
- E. the client's IP netmask
- F. the client's IP address
Answer: A,B,F
NEW QUESTION 23
An LTM has the 3 virtual servers, 2 SNATs, four self IP addresses defined, and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults.
Assume port exhaustion has not been reached. Vi rtualServerl Destination: 10.10.2.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network SNAT Automap configured Vi rtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network Vi rtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNAT1 Source IP: 10.10.0.0 netmask 255.255.0.0 SNAT Address: SNAT Pool with 2 members
172.16.20.50 and 192.168.10.50 SNAT2 Source IP: All Addresses SNATAddress:
10.10.2.102 Floating Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1
- A. Source IP: 10.10.2.1; Destination IP: 10.10.2.10
- B. connection attempt is made with a source IP and port of 10.10.100.50:2222 and a destination IP and port of 10.10.2.10:80. When the request is processed, what will be the source and destination IP addresses?
- C. The request will be droped.
- D. Source IP: Either 172.16.20.50 or 192.168.10.50; Destination IP: 10.10.2.10
- E. Source IP: 10.10.2.1; Destination IP: pool in the 172.16/16 network C
- F. Source IP: 10.10.2.102; Destination IP 10.10.2.10
Answer: D
NEW QUESTION 24
Which tool is used on BIG-IP systems to capture data packets?
- A. qkview
- B. ethereal
- C. snoop
- D. tcpdump
Answer: D
NEW QUESTION 25
Which persistence method will always recognize a client when the client returns to the same virtual server?
- A. source address
- B. SSL
- C. No persistence method work in all situations.
- D. expression [universal]
- E. MSRDP
Answer: C
NEW QUESTION 26
An LTM has the 3 virtual servers, 2 SNATs, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults.
Assume port exhaustion has not been reached. VirtualServerl Destination: 10.10.2.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.1 61.16 network SNAT Automap configured V VirtualServer2 Destination: 10.10.2.102:* netmask
255.255.255.255 Transparent with 3 pool members
in the 192.168/16 network VirtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNATI Source IP: 10.10.0.0 netmask 255.255.0.0 SNAT Address: SNAT Pool with 2 members
172.16.20.50 and 192.168.10.50 SNAT2 Source IP: All Addresses SNAT Address: 10.10.2.103 Floating Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1 A connection attempt is made with a source IP and port of 10.20.100.50:2222 and a destination IP and port of 10.10.2.102:443. When the request is processed, what will be the source and destination IP addresses?
- A. Source IP: 10.20.10.50; Destination IP: pool member in the 192.168/16 network
- B. Source IP: 10.10.201; Destination IP: pool member in the 192.168/16 network G
- C. Source IP: 10.10.201; Destination IP: 10.102.102
- D. The request will be dropped.
- E. Source IP: 10.10.2.103; Destination IP: 10.10.2.102
- F. Source IP: 10.10.2.103; Destination IP: pool member in the 192.168/16 network
Answer: E
NEW QUESTION 27
Why would an administrator capture monitor traffic between a BIG-IP and servers?
- A. Viewing monitor traffic could help the administrator to define a more robust monitor.
- B. Only client traffic may be captured; monitor traffic may not be captured.
- C. If client traffic to servers was failing, viewing and analyzing monitor traffic would determine the reason.
- D. If a client were having difficulty logging into a load-balanced SSH server, viewing and analyzing the connection process would determine the reason.
Answer: A
NEW QUESTION 28
The partial configuration below includes an iRule, a virtual server, and pools. When traffic from the client at 160.10.10.10:2056 connects to the virtual server Test_VS and sends an HTTP request, what will the client's source address be translated to as the traffic is sent to the chosen pool member? pool Test_Pool { member
10.10.10.10:80 member 10.10.10.11:80 } snatpool lower_range { member
10.10.10.1 } snatpool upper_range { member 10.10.10.2 } rule Test_iRule { when CLIENT_ACCEPTED. { if { [TCP::local_port]
< 2024 }{ snatpool lower_range } else { snatpool upper_range } virtual Test_VS { destination 200.10.10.1 :http pool Test_Pool rule Test_i Rule }
- A. 200.10.10.1200.10.10.1
- B. 10.10.10.2
- C. 10.10.10.1
- D. 160.10.10.IOC.160.10.10.10
- E. It could be either 10.10.10.10 or 10.10.10.11.E.It could be either 10.10.10.10 or 10.10.10.11.
Answer: C
NEW QUESTION 29
A BIG-IP has the following objects configured: A SNAT pool with 2 members: 150.10.33.33 and 10.10.1.33 A load-balancing pool with 5 members: 10.10.1.1-10.10.1.5:80
The BIG-IP has two self-IP addresses: 150.10.10.10 and 10.10.1.10 A virtual server at 150.10.30.30:80 that is associated with both the SNAT pool and the load-balancing pool. If a client at IP address 200.10.10.10 initiates a connection to the virtual server, what will the source IP address be in the packets sent to the chosen pool member?
- A. 10.10.1.10
- B. 10.10.1.33
- C. 200.10.10.10
- D. 150.10.30.30
- E. 150.10.33.33
- F. It could be any of the addresses of the members of the load-balancing pool.
Answer: B
NEW QUESTION 30
Which statement describes advanced shell access correctly?
Which statement describes advanced shell access correctly?
- A. The context determines which events are available for iRule processing.
- B. The context determines the values of commands that vary between client and server.
- C. The context determines which pools are available for load balancing.
- D. The context has no impact on events.
Answer: B
NEW QUESTION 31
......
Free 301 braindumps download: https://certkingdom.practicedump.com/301-practice-dumps.html